Longlife cutting disc For stone
Cutting disc for stone Longlife
CDISC-LL-GREY-STN-SR-TH3,0-BR22,2-D180MM
ZEBRA
Register now and access more than 125,000 products
- Extremely low susceptibility to breakage
- Storage: dry, at 20°C ambient temperature
- Work only with appropriate protective clothing
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting - increased risk of breakage!
- Ensure proper contact pressure
- Always clamp cutting discs (straight design) with metal ring towards the power tool
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organization for the Safety of Abrasives)
Datasheets(X)
- Particularly suitable for stone, natural stone, artificial stone, calcium silicate block, concrete/reinforced concrete
- Cutting stone, plates, prefabricated parts, clay bricks, tiles, clay pipes, roof tiles and clinker brick etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 4 of 4 points |
Cutting ability (point system) | 2 of 4 points |
Handling/user-friendliness (point system) | 2 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter | 180 mm |
Thickness | 3 mm |
Drill hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 8500 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Wall chaser MSF 180N
Ball hammer
Universal protector W.TEC® COVER CAP WP 600 Polyethylene, red
Fabric sanding belt Zirconia alumina electric grinding file
Oil drain plug
Lock plate with two tabs
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
1-ear clamp with insert ring
Terminal board in polyamide 6.6
1/4 inch socket wrench insert, metric short