Longlife cutting disc For steel
Cutting disc for steel Longlife
CUTDISC-LL-BLUE-ST-SR-TH2,5-BR22,2-D180
ZEBRA
Register now and access more than 125,000 products
- Extremely low susceptibility to breakage
- Very high lateral stability
- Storage: dry, at 20 °C ambient temperature
- Always wear appropriate protective clothing while working.
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure
- Always clamp cutting discs (straight design) with the metal ring towards the power tool
- For further information, see enclosed instructions for use
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organization for the Safety of Abrasives)
- Particularly suitable for steel
- Cutting solid materials, thick-walled pipes, profiles and metal sheets etc.
 | |
Versatility (points system) | 1 of 4 points |
Service life (points system) | 4 of 4 points |
Cutting ability (point system) | 2 of 4 points |
Handling/user-friendliness (point system) | 2 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter | 180 mm |
Diameter x thickness | 180 x 2.5 mm |
Thickness | 2.5 mm |
Bore hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 8500 U/min |
Max. circumferential speed | 80 m/s |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Ear defenders
RW® bit
Metric double open-end wrench DIN 3110/ISO 1085
1/4 inch socket wrench insert, metric short
Oil binder Road
Pneumatic impact screwdriver DSS 3/4 inch H
Suction hose, electrically conductive For ISS and TSS series
Double open-end wrench assortment 8 pieces
Hole puncher assortment 12 pieces with manual hydraulic punch
Cable tie KBL 1 made of polyamide with plastic tongue
