Long sanding belt
Long sanding belt wood and veneer
SNDBL-LNG-KPF-P150-150X6800MM
ZEBRA
Register now and access more than 125,000 products
Minimal clogging thanks to the anti-static equipment.
This results in an extremely long service life
F-paper, half-open scattering with anti-static equipment
- Extremely high load-bearing capacity of sanding belts (e.g. calibration)
- Prevents the sanding belt from clogging up too soon
- Optimum grinding finish
- Low impact from grinding dust (fine dust)
The belts should be stored in dry, frost-free rooms. Do not store near heaters, cold or damp walls, doors or windows and not directly on the floor. Storage temperatures between 18°C and 22°C at a relative humidity between 45% and 65% are recommended. Protect belts from exposure to direct sunlight. If possible, store sanding belts in the original packaging until used. Store sanding belts that have been removed from the packaging in such a way that deformations are prevented.
Datasheets(X)
For wide-belt sanding machines
Calibration, sanding of cabinet fronts and side panels, sanding of frame components for solid wood cupboards. Especially suitable for veneers, solid wood (hardwood, softwood, cross-grained wood, resinous woods) and wood materials.
Width x length | 150 mm x 6800 mm |
Grid size | P150 |
Antistatic | Yes |
Scattering | Half-open scattering |
Backing material | F-weight paper |
Material of abrasive medium | Aluminium oxide |
Last viewed
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 10.9, plain
Stud screw A2 stainless steel
Circular saw blade, wood For cordless hand-held circular saw HKS 10-A/12-A
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Isophonic reinforced clamp M8/10
U-shaped cutting knife
3/8 inch socket wrench insert metric, hexagon, short
Multi-use bimetal bandsaw blade One blade for any job
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain