Locking bolt with locking groove and fine thread
Steel, shape C, fine thread
INPL-MR-5.8-C-M8X1X38,5
Register now and access more than 125,000 products
Moving to a different locking position is possible only once the bolt has been manually disengaged
Datasheets(X)
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Steel |
Property class | 5.8 |
Material of handle | PA - Polyamide |
Material of pin | Hardened steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Fine pitch thread |
Form | C with latching notch, without lock nut |
Thread type x nominal diameter x pitch (d1) | M8 x 1 |
Stud diameter (d2) | 4 mm |
Head diameter (dk) | 18 mm |
Length (l1) | 38.5 mm |
Shaft length (ls) | 15 mm |
Thread length (lg) | 13 mm |
Height (h1) | 4 mm |
Height of the nut (h2) | 6 mm |
Chamfer height (f1) | 1 mm |
Width across flats (SW1) | 10 mm |
Spring force start (F1) | 6 N |
Spring force end (F2) | 12 N |
Product weight (per item) | 0.100 g |
Last viewed
Adapter A4 for bi-metal cylinder saw for diameters of 14 to 30 mm
Upholstery nozzle, plug in
Screwdriver, 1/4 inch With quick-change chuck
Metric double open-end wrench DIN 3110/ISO 1085
Compressed air hose reel DSA-S with wSafe coupling
Flat paintbrush For solvent-based lacquer and paint systems
Rust remover Rost-Off
Winding wire
Cable ties, KBL INOX, AISI 304 stainless steel With ball seal
Hammer drill bit cassette with SDS and Duo-S Vario drive arbor Seven pieces