Locking bolt with locking groove and fine thread
Steel, shape C, fine thread
INPL-MR-5.8-C-M10X1X43,5
Register now and access more than 125,000 products
Moving to a different locking position is possible only once the bolt has been manually disengaged
Datasheets(X)
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Steel |
Property class | 5.8 |
Material of handle | PA - Polyamide |
Material of pin | Hardened steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Fine pitch thread |
Form | C with latching notch, without lock nut |
Thread type x nominal diameter x pitch (d1) | M10 x 1 |
Stud diameter (d2) | 5 mm |
Head diameter (dk) | 21 mm |
Length (l1) | 43.5 mm |
Shaft length (ls) | 17 mm |
Thread length (lg) | 15 mm |
Height (h1) | 5 mm |
Height of the nut (h2) | 7 mm |
Chamfer height (f1) | 5 mm |
Width across flats (SW1) | 13 mm |
Spring force start (F1) | 5 N |
Spring force end (F2) | 12 N |
Product weight (per item) | 0.100 g |
Last viewed
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Scriber With coded steel handle and screwed in straight and curved steel needle
1/2 inch socket wrench insert metric, hexagon, short
Tex-Rein cleaning cloth
Chipping hammer MH 10-SE
Nozzle and needle kit ADVANCE W18
Adhesion resin UNIRESIN
Hand tap, third tap HSS DIN 352
Acrylic sealant
Warning tape, diagonal