Locking bolt with key ring and fine thread
Steel, shape S, fine thread
INPL-RG-5.8-S-M8X1X15
Register now and access more than 125,000 products
Moving to a different locking position is possible only once the bolt has been manually disengaged
Datasheets(X)
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Steel |
Property class | 5.8 |
Material of pin | Hardened steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Fine pitch thread |
Form | S with lock nut |
Thread type x nominal diameter x pitch (d1) | M8 x 1 |
Stud diameter (d2) | 4 mm |
Ring diameter (d3) | 15 mm |
Shaft length (ls) | 15 mm |
Thread length (lg) | 13 mm |
Height (h1) | 4 mm |
Height of the nut (h2) | 6 mm |
Chamfer height (f1) | 1 mm |
Width across flats (SW1) | 10 mm |
Width across flats 2 (SW2) | 13 mm |
Spring force start | 6 N |
Spring force end | 12 N |
Product weight (per item) | 0.100 g |
Last viewed
HighVis LUMEN 4-in-1 parka
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Washer ISO 7092 A2 stainless steel 200 HV plain
Fabric sanding belt Zirconia alumina electric grinding file
Number punches
Twist drill bit HSCo DIN 338 type RN oxide
1-ear clamp with insert ring
Pan head tapping screw, shape F with recessed head DIN 7981, A2 stainless steel, plain, round head, PH drive, shape F
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Reinforcement passivating primer PASSREPAIR