Lock washer VS Spring steel, type VS, zinc-flake coating, silver (ZFSH)
Spring steel flake zinc silver type VS
WSH-LOK-VS-ZFSH-D10,0
Register now and access more than 125,000 products
Belleville washer shape
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M10 |
Suitable for thread (imperial) | 3/8 inch |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 16 mm |
Height (h1) | 2.0 mm |
Épaisseur (s1) | 1.4 mm |
Matière | Spring steel |
Finition | Flake zinc silver |
Conforme à la norme RoHS | Yes |
Korrosionsschutzdauer | 720 h |
Form | VS |
Locking function | Embedding locking device |
Last viewed
System case 8.4.2
Hexagonal bolt with thread up to the head ISO 4017, steel strength class 10.9, zinc flake, silver (ZFSHL)
Suction brush, plug-in For ISS 35(-S automatic) and ISS 45-M automatic
Hexagonal bolt with thread up to head ISO 4017, steel strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Polyamide extension Metric according to EN 60423
Grease for hydraulic rock breakers W-EP 290
O-ring adapter 3 O 42 For brake bleeder
Safety glasses UB ONE
Double nipple
Circlip For bore hole shape JS DIN 472 JS plain spring steel