Lock washer VS Spring steel, plain
Plain spring steel type VS
WSH-LOK-VS-16,0X10,5X1,40
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
 | |
Suitable for screw thread | M10 |
Suitable for thread (imperial) | 3/8 inch |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 16 mm |
Height (h1) | 2.0 mm |
Thickness (s1) | 1.4 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | VS |
Datasheets(X)
CAD data (available after login)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hand tap, second tap HSS DIN 352
Assembly for fastening objects indoors, for loads up to 1.5 T
Medium-strength flange sealant
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Rubber washer SBR70
1/4-inch socket wrench insert For TX screws
1/4 inch socket wrench insert, metric short
Twist drill DIN 340 HSS type RN
Plastic multi-purpose Zebra Shark® anchor without collar
