Lock washer VS A2 stainless steel
Stainless steel A2 type VS
WSH-LOK-A2-VS-10,0X6,4X1,00
Register now and access more than 125,000 products
The Belleville washer shape achieves an optimum friction fit with simultaneous mechanical interlock via the helical gearing. Higher pre-tensioning forces can be achieved due to the washer's increased thickness
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M6 |
Internal diameter (d1) | 6.4 mm |
Outer diameter (d2) | 10 mm |
Height (h1) | 1.4 mm |
Thickness (s1) | 1.0 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Connector for guide rail
Heat-shrink end cap
Smooth blank sign
Dry abrasive paper strip wood KP perfect
Sandpaper strip Useit® Superpad vehicle
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Drilling screw, hexagon head, A2 stainless steel with sealing washer pias®
Windscreen cleaner with anti-freeze protection down to -10 °C
VARIFIX® sound isolator