Lock washer S Spring steel, plain
Plain spring steel type S
WSH-LOK-S-9,5X6,7X0,60
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases—primarily when using short screws and loads which are vertical to the screw axis—to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
 | |
Internal diameter (d1) | 6.7 mm |
Outer diameter (d2) | 9.5 mm |
Height (h1) | 1.2 mm |
Thickness (s1) | 0.6 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Stair bolt
Hand tap, second tap HSS DIN 352
Silicone sealant, food-grade
Metric combination wrench with POWERDRIV®
Silicone fluid silicone spray
TX double box-end wrench
Hammer drill H 22-SLE
1-ear clamp with insert ring
Insulation anchor W-DD-N
