Lithium grease W-EP 280
Lithium grease W-EP 280
GRSE-(W-EP280)-LITHIUM-NLGI2-45KG
Art.-no. 08904015
EAN 4056807075952
Register now and access more than 125,000 products
Features
- Homogeneous and stabilised mixture of oils, grease, thickeners and state-of-the-art additives.
- Good resistance to high working temperatures.
- Highly resistant to running.
- High resistance to friction.
- Outstanding water resistance.
- Superb protection against rust and corrosion.
Advantages
- Prevents the ingress of dust particles.
- Easy to use at room temperature.
- Preservation of internal mechanisms and machinery.
- Excellent performance.
Benefits
- Significantly reduces the time spent lubricating machinery.
- Lubricant savings due to the excellent quality of the grease.
- Lasts up to three times longer than other high-performance greases currently on the market.
- Anti-wear properties and a long service life of metal components.
These instructions are merely recommendations based on our experience.
We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Suitable for lubricating bearings, including bearings subject to very high loads and slow and oscillating speeds in the most difficult conditions, such as earthwork and production subject to high levels of dust (particularly suitable for lubricating bolts).
Lubrication of agricultural machinery (tractors, harvesters etc.), public works machinery (excavators, dumpers etc.), mining and quarrying machinery (for removing and moving material).
Meets specifications for Caterpillar, Komatsu, Demag, Hanomag, Orenstein & Koppel (O.K.), Liebherr and Furukawa.
Apply using conventional greasing systems (manual grease guns, pneumatic grease guns etc.).
Weight of content | 45000 g |
Soap base | Lithium complex |
Colour | Black, bright |
Corrosion protection period/category | Corrosion category 0-0 |
Shelf life from production | 60 Month |
Oil basis | Synthetic / mineral oil combination |
Smell/fragrance | Hydrocarbon |
Density | 0.895 g/cm³ |
Density conditions | at 15°C |
Acid-free | Yes |
| Technical data | |
| Colour | Metallic black |
| Thickening soap, type | Lithium complex |
| Additives and fillers | Molybdenum disulphide, MoS2 |
| Percentage of molybdenum disulphide, in % | >3 % |
| Dropping point, ASTM D-566, in °C | >280 |
| Maximum recommended working temperature, approx. in °C | 187 |
| NLGI consistency, grade | 2 |
| Oxidation stability, ASTM D-942, in psi | 3,5 |
| Emcor test, DIN 51802 E - corrosion test | 0 - 0 |
| Machine with four ball bearings: | |
| - Wear (1 h/40 kg/75 °C), ASTM D-2266, dia. in mm | 0,38 |
| - Welding load, IP-239, kg | 500 |
| Timken extreme pressure tester, ASTM D2509, lbs | 60 |
| Volumetric mass (at 20 °C) | 0.900 g/cm3 |
| DIN 51502 standard classification | KPF 2P-10 |
Last viewed
Load block with captive screw
1/2-inch impact socket wrench insert hexagon, metric, long
Tapping and chipping hammer BMH 40 BASIC
Hexagonal bolt with threading up to head ISO 4017, plain A4-80 stainless steel
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
Stair bolt
Toothed ring drill chuck
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
1/4-inch socket wrench insert, TX head for external TX screws
Hexagon screw, type S/S — cotter-pin installation DIN 933 steel 8.8, zinc-plated blue