Leak stop spray
Leak stop syringe
LKSTOP-SYRING-F.LEAKADD-60ML
Register now and access more than 125,000 products
- No harmful polymers, hence safe for components of the air-conditioning system
- Additive protects against future corrosion, and can therefore also be used for preventive application
- Does not react with air or moisture
- Reduces noises from the air-conditioning compressor
- Compatible with all coolants
Datasheets(X)
Air-conditioning units in vehicles and buildings.
The air-conditioning unit must be switched on before use. Remove the protective cap from the spraying device, hold upright and expel the remaining air from the plunger. Connect the spraying device via the hose to the air-conditioning unit and, during the vacuum phase, fill the required quantity as quickly as possible by pushing the spray. Remove the spraying device and the hose from the air-conditioning unit. Replenish the coolant if necessary. The leak stop process takes approx. 30 minutes, during which time the air-conditioning unit must be switched on.
Shelf life from production | 48 Month |
Last viewed
VDE junction box WMini
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
Würth MODYF high-visibility work fleece
System connector SV 20 E
Daily Race S1P low-cut safety shoes
PVC packing tape
Pin contact 1.0 Uninsulated
Wheel hub grinder type A With 1/2 inch drive
Cap LUMEN FRESH
1/4-inch bit holder