Lamella flap disc stainless steel
Lamella flap disc for stainless steel
FLPDISC-0579430528-BIGPACK
Register now and access more than 125,000 products
For freehand grinding with electric or pneumatic angle grinders
Circumferential speed max. 80 m/s
Free of iron, chlorine and sulphur (≤ 0.1%)
Robust polyester-cotton mixed fabric
Glass fabric backing disc
Abrasive cloth (zirconia alumina)
- Long service life
- High rate of material removal
- Self-sharpening
Use appropriate protective clothing, e.g. safety glasses, gloves, work shoes and dust mask when working. Always use an appropriate protective hood when performing grinding work. Using damaged discs increases the risk of accidents. Work only with undamaged discs. The permissible circumferential speed may not be exceeded.
Clear and correct disc storage
Dry, at +20°C room temperature
Complies with the most demanding safety requirements of European Standard EN 13743 and the OSA (Organization for Safety of Grinding Tools )
- Used to grind edges and surfaces, dressing and smoothing, deburring and for weld seam processing.
- Stainless steel sheets, non-alloyed special steels, alloyed and high-alloy steels, rust- and acid-proof steels, chrome-nickel steels
 | |
Diameter (Ø) | 125 mm |
Bore hole | 22.23 mm |
Grid size | 80 |
Design | Straight |
Material of carrier disc | Glass fabric |
Max. rotation speed | 12250 U/min |
Material of abrasive medium | Zirconium conrundum |
Datasheets(X)
Last viewed
Cleaning kit for spray gun ESENCIAL/ADVANCE
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Cable tie KBL 1 made of polyamide with plastic tongue
Multi-use bimetal bandsaw blade One blade for any job
Cordless hammer drill ABH 18 BASIC
Suction hose, electrically conductive For ISS and TSS series
ELMO® device screw box
C 6.3 TX bit (1/4 inch)
Angle grinder protective panel on both sides WSH 230
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
