Lamella flap disc OSF® (One-Step Finish)
Lamella flap disc OSF
FLPDISC-ZC-OSF-BR22,23-MEDIUM-D125
ZEBRA
Register now and access more than 125,000 products
3 in 1
- 1. Grinding welding seams
- 2. Blending
- 3. Finishing
- Free from iron, chlorine and sulphur (≤ 0.1 %)
- Surface-conditioning non-woven nylon abrasive
- Aluminium oxide with Top Size abrasive cloth
- Rugged fibreglass backing pad
- Enormous time savings (extreme reduction in work steps)
- Grinding welding seams and finishing in one step
- Constant, low Ra value (high surface quality)
- No change in shape during grinding
- Cooler grinding (low working temperature)
- No clogging
- No additional backing pad required
The surface quality is an expression of the roughness (Ra value)
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Grid size | Medium |
Design | Domed |
Material of carrier disc | Glass fabric |
Max. rotation speed | 12250 rpm |
Min./max. recommended rotation speed | 2500-3500 rpm |
Max. recommended rotation speed | 3500 rpm |
Material of abrasive medium | Aluminium oxide |
Last viewed
Contact spray Oxidation solvent
A9 BAS – Neutral Silicone
End piece For FB windowsill duct
Metric combination wrench with POWERDRIV®
Hexagonal bolt with thread up to the head
HSS Multi Performance TiAIN stepped twist drill bit
1/4" multi-socket wrench insert bi-hex, multi profile
Pull handle ST/A110
Slotted screwdriver with wooden handle
3/4-inch impact socket wrench insert hexagon, metric, short