Lacquer pen
Acrylic paint pen
ACRYPNTPEN-WEISS-R9010-GLOSS-12ML
Register now and access more than 125,000 products
Protective paint
- Excellent adhesion and coverage
- Quick drying
- Suitable for indoor and outdoor use
Universal
- Suitable for metal, aluminium, wood, glass, ceramic, cement and plastic
- Packaged in a practical bottle
- With an integrated brush in the end
The colour samples shown may vary slightly from the real colours due to printing limitations
While the technical advice given is based on our experience and should be followed, it is purely indicative and must be confirmed R10 through extensive practical tests. This does not relieve the purchaser of their responsibility to personally test our products to see whether they are suitable for the intended use
Datasheets(X)
Remove rust, old layers of paint and dirt. The support must be clean, dry and free from grease. Mix the colour well by vigorously shaking before use. Apply over the damaged part until it is completely covered
Chemical basis | Acrylic resin |
Colour | Pure white RAL 9010 |
Density | 0.95 g/cm³ |
Density conditions | at 20°C |
Min. dust-drying time | 5 min |
Max. dust-drying time | 10 min |
Min. flashing point | 27 °C |
Ignition temperature | 370 °C |
Light-fastness | Good |
Weight of content | 12 g |
Shelf life from production | 60 Month |
Conditions to maintain shelf life from production | at 20°C |