LONGLIFE cutting disc For stone
Cutting disc for stone Longlife
CDISC-LL-GREY-STN-CE-TH2,5-BR22,2-D125MM
Art.-no. 0670151252
EAN 4038898431800
Register now and access more than 125,000 products
- High protection against breakage
- Extremely laterally stable and precise
- Easy to use
- ZEBRA quality for particularly high demands
- Store in a dry place, at 20 °C room temperature
- Always wear appropriate protective clothing while working
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure
- Always clamp cutting discs (straight design) with the metal ring towards the power tool
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organization for the Safety of Abrasives)
Datasheets(X)
- Particularly suitable for stone, natural stone, artificial stone, calcium silicate block, concrete/reinforced concrete
- Cutting stone, plates, prefabricated parts, clay bricks, tiles, clay pipes, roof tiles and clinker brick etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 4 of 4 points |
Cutting ability (point system) | 2 of 4 points |
Handling/user-friendliness (point system) | 2 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter x thickness | 125 x 2.5 mm |
Bore hole | 22.23 mm |
Design | Cranked |
Max. rotation speed | 12250 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head
Screw for chipboard and laminate NEWCUT
Machine tap HSCo VaryTap blue blind hole DIN 371/376
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
1/2 inch ratchet with turntable switching
Dust cassette for random orbital disc sander ETS 125-E and ETS 150-E twin
Driver Classic protective glove
MFD-S multi-purpose drill bit with straight shank