Knife blade, straight
Knife blade, straight
CUTKNFE-WNDWREP-SR-L91MM
Register now and access more than 125,000 products
Conversion of Fein part numbers to Würth part numbers.
The three digits after 639 03 ... in original Fein numbers are crucial, or the three-digit number punched into the knives.
If the number begins with 0, e.g. 095, the 0 is replaced with a 5 and the result is given the prefix 0696. In this instance, for example, the Würth item no. would be 0696 595.
If the number begins with 1 or 2, e.g. 126, a 5 is inserted before the 1 or 2 and the result is given the prefix 0696. In this instance, for example, the Würth art. no. would be 0696 512 6.
Datasheets(X)
Cutting edge length | 91 mm |
Last viewed
Case
1/2 inch socket wrench extractor, JAW
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Lock plate with tabs
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 10.9, plain
Reinforced rubber hose For one-handed, two-handed grease gun and lever grease gun
Sanders and polishers pneu., acc.
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
High Power battery
Empty container with spray gun Rost Off Plus