Interior trim clip, type 2
Interior trim clip with open anchor
INTRMCLIP-PSA-CITR/PEUG-TRANSP
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Min./max. drill hole diameter | 8.2-8.2 mm |
Min./max. attachment thickness | 0.6-0.8 mm |
Head diameter (A) | 16 mm |
Core diameter (B) | 4.6 mm |
Length below head (D) | 15.6 mm |
Grip range head (E) | 2.9 mm |
Colour | White |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Universal |
Corresponds to original spare part number | 6991E8 |
Type of vehicle | Universal |
Corresponds to original spare part number 2 | 696639 |
Last viewed
Reinforced rubber hose For one-handed, two-handed grease gun and lever grease gun
Mini adapter set 3 pieces
Pneumatic random orbital sander DTS 136C
Knife blade, straight, long, toothed
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
ELMO® speed screws Zinc-plated steel, blue, RW slot drive
Premium spade chisel with SDS-max drive arbour
1/2" socket wrench insert metric, bi-hex, short
Pneumatic impact screwdriver DSS 1/2 inch H
Empty case for MH 11-XE demolition hammer