Interior trim clip, type 2
Interior trim clip with open anchor
INTRMCLIP-POM-SEAL-UNCOL-(D8,1-8,5MM)
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Min./max. drill hole diameter | 8.10-8.50 mm |
Min./max. attachment thickness | 0.80-0.80 mm |
Head diameter (A) | 13.20 mm |
Core diameter (B) | 5.50 mm |
Width (C) | 18.00 mm |
Length below head (D) | 14.20 mm |
Grip range head (E) | 2.70 mm |
Colour | Neutral |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | VAG, Mercedes-Benz |
Corresponds to original spare part number | 2E1827649, A0119887678 |
Installation location | Bodywork |
Type of vehicle | Passenger car |
Last viewed
Wood connection plate cutter
Counter nut, polyamide Metric according to EN 60423
Conical countersink HSCo 90° with cross hole
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
3/8 inch glow plug socket wrench set
wSafe® 2000 PU pneumatic spiral hose
O-ring For vehicle air-conditioning systems
Standard car windscreen wiper With pre-assembled multi-adapter
Hexagonal bolt with shank DIN 931, A4-70 stainless steel, plain
Conical countersink yellow/blue ring HSS bit 90° short