Interior trim clip, type 2
Interior trim clip with open anchor
INTRMCLIP-POM-SEAL-GREEN-(D8,0-8,2MM)
Register now and access more than 125,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 8.00-8.20 mm |
Min./max. attachment thickness | 0.70-1.00 mm |
Head diameter (A) | 13.20 mm |
Core diameter (B) | 5.90 mm |
Width (C) | 17.60 mm |
Length below head (D) | 16.50 mm |
Grip range head (E) | 2.30 mm |
Colour | Green |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Universal, VAG, Renault |
Corresponds to original spare part number | 6Y0867260, 7701057716 |
Installation location | Universal, Interior |
Type of vehicle | Passenger car |
Last viewed
Aluminium handle strip
VARIFIX® Systemfix 41 quick fastener For assembly connection of all Varifix mounting rails in the 41 range
Plastic blind rivet
Impact cap
Circlips assortment 1050 pieces in system case 4.4.1.
Flat washer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Pressure plate For shaping device
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel