Interior trim clip, type 2
Interior trim clip, type 2
INTRMCLIP-MB-WHITE
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | White |
Min./max. drill hole diameter | 8.6-8.8 mm |
Min./max. attachment thickness | 0.9-2 mm |
Head diameter | 13.2 mm |
Core diameter | 5.9 mm |
Grip range head | 2.3 mm |
Max. width | 20 mm |
Length below head | 15.9 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | A0089880978 |
Last viewed
Hand tap, second tap HSS DIN 352
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Retaining spring For pneumatic chipping hammers
Classic warm jacket
Jump starter, 12/24 V
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Thin-walled heat-shrink hose Without internal adhesive
Dispenser system
1/2 inch socket wrench insert metric, hexagon, short
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®