Interior trim clip type 1 suitable for oval holes
Interior trim clip with half-round head
INTRMCLIP-HONDA-PLUG-PLA-WHITE
Register now and access more than 125,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
 | |
Min./max. drill hole diameter | 8.50-8.50 mm |
Min./max. attachment thickness | 2.00-2.00 mm |
Head diameter (A) | 18.50 mm |
Core diameter (B) | 10.00 mm |
Width (C) | 18.50 mm |
Length below head (D) | 13.50 mm |
Grip range head (E) | 2.40 mm |
Colour | Neutral |
Material | PA 66 - Polyamide |
Suitable for vehicle manufacturer | Honda |
Corresponds to original spare part number | 38993634810 |
Installation location | Universal |
Type of vehicle | Passenger car |
Last viewed
Ratchet for 10 mm bits
3/8-inch socket wrench For TX screws, short
Hexagon nut with trapezoidal thread
1/4 inch cardan joint
Support clip type SRV
Pneumatic sandblaster
Centre drill bit For hammer core drill bit
Tapping and chipping hammer BMH 40 BASIC
Aluminium standing ladder with platform ALUFINE XT3
Open-end slugging wrench metric, straight