Interior trim clip type 1
Interior trim clip, type 1
INTRMCLIP-MB-PLA
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | White |
Min./max. drill hole diameter | 7.5-7.7 mm |
Min./max. attachment thickness | 0.88-0.88 mm |
Head diameter | 13 mm |
Core diameter | 6 mm |
Grip range head | 2.5 mm |
Max. width | 18 mm |
Length below head | 12.7 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | A0039884178 |
Last viewed
Holding magnet For hand-held lamps
Plasterboard dowel
1/2 inch socket wrench insert metric, hexagon, short
Hexagonal nut with clamping piece (non-metal insert) ISO 7040, steel 8, zinc-plated, blue passivated (A2K)
1/4" socket wrench insert metric, long
1/2 inch socket wrench insert, metric
Hole puncher assortment 12 pieces with manual hydraulic punch
Special oil For pneumatic tools
TX double box-end wrench
End cap set For screwing/clipping on