Interior trim clip, closed
Interior trim clip with closed anchor
INTRMCLIP-RUBBERLIP-POM-UNCOLORED
Register now and access more than 125,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 9.50-10.00 mm |
Min./max. attachment thickness | 1.50-1.80 mm |
Head diameter (A) | 13.00 mm |
Length below head (B) | 11.20 mm |
Core diameter (C) | 3.00 mm |
Grip range head (D) | 1.50 mm |
Colour | Neutral |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | VAG, Audi, Volkswagen |
Corresponds to original spare part number | 7H0843514, 7E0843514 |
Installation location | Bodywork |
Type of vehicle | Passenger car |
Last viewed
Fleece sanding belt For electric grinding file
SMART STEP EU+ HSS twist drill bit DIN 338
Paint retouching pen
Flag hinge with zinc-plated shaft
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Shim ring DIN 988, steel, plain
Allen key, hexagon socket with ball head Extra-long design
3D hinge dia. 16 mm
Flat brush WB For water-based paints
Colour pin nail colour