Interior trim clip, closed
Interior trim clip with closed anchor
INTRMCLIP-POM-BLUE-D8,2MM
Register now and access more than 125,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 8.20-8.30 mm |
Min./max. attachment thickness | 0.70-1.50 mm |
Head diameter (A) | 13.00 mm |
Length below head (B) | 15.10 mm |
Core diameter (C) | 4.50 mm |
Grip range head (D) | 2.90 mm |
Colour | Blue |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | BMW, MINI, Citroen, Peugeot |
Corresponds to original spare part number | 51139804996, 8337FC, 6991Z1 |
Installation location | Interior, Bodywork |
Type of vehicle | Passenger car |
Last viewed
Forestry dungarees
VDE 3/8 inch ratchet
Pneumatic impact screwdriver DSS 1/2 inch H
Flat paintbrush For solvent-based lacquer and paint systems
Würth MODYF high-visibility yellow work sweatshirt
Hand tap, taper tap HSS DIN 352
Pan head tapping screw, shape C with AW drive
Glass mirror panel For telescopic rod
Cone grease nipple Angled shape 45°, DIN 71412 shape B, zinc-plated steel
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)