Interior lining clip Type 7
Interior trim clip, type 7
INTRMCLIP-PSA-CITR/PEUG-TRANSPARENT
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | PA 6 - Polyamide |
Colour | White |
Min./max. drill hole diameter | 8.5-8.5 mm |
Min./max. attachment thickness | 0.7-1.5 mm |
Head diameter | 8 mm |
Core diameter | 3 mm |
Grip range head | 1.8 mm |
Max. width | 10 mm |
Length below head | 10.45 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | 6995X3 |
Last viewed
Gun ADVANCE W18
System case 8.4.2 transparent
Tension bolt for manual/hydraulic punch
Combi screw tap assortment Bit HSS SMART STEP, 6 pieces
Spigot hinge 3 pieces
Connection sleeve with bolt For system connector SV 20 E
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Countersunk screw, type SK/A4 — cotter-pin installation DIN 7991 (ISO 10462) A4 stainless steel, with countersunk washer, A4 stainless steel
Rivet nut with flat head and knurled shank
Allen key