Insulation TERMOPLANE
Thermal insulation sheet TERMOPLANE
THERMINSUSHT-TERMOPLANE-W1,2M-L20M
Register now and access more than 125,000 products
- Fabric composed of a plastic film, a 3 mm thick dry air bubble, a 9 μ aluminium foil and a 5 mm thick polyethylene foam.
- High thermal and acoustic insulation of floors at home, preventing energy loss.
- Light, clean, easy to apply and reduced thickness (8 mm).
- Suitable for most surfaces.
- Does not rot, unalterable by insects, rodents or chemicals. Hypoallergenic.
- Impervious to moisture, creating an excellent condensation barrier.
- European Technical Evaluation ETE 17/0519.
- EPD (Environmental Product Declaration) certified, in accordance with ISO 14025 and EN 15804:2012+A2:2019.
Datasheets(X)
On floors between houses.
On floors in contact with non-habitable spaces, garages, porches etc.
On floors in contact with the ground.
Inverted roofs.
Flat surfaces.
Heated floors, always under the insulation plate installed in underfloor heating systems. It cannot be in direct contact with the heat source.
Must be placed with the polyethylene foam facing up.
Between the floor slab and the floor or compression layer (minimum 30-40 mm).
Seal the joints using adhesive tape.
Heated floors, where not in direct contact with the radiant source.
It is advisable to level the substrate.
Material | PE - Polyethylene |
Colour | White |
Min. temperature resistance | -20 °C |
Max. temperature resistance | 80 °C |
Water-vapour permeability | 5.7 g/m²/min |
Building material class | 0 - not applicable |
Type description | Reflective insulation for floor & roof |
Product weight (per item) | 10.000 kg |
| Technical data | |
| Nominal thickness | 8 mm |
| Width | 1.20 m (±3 %) |
| Length | 20 m (±5 %) |
| Roll surface area | Approx. 24 m² |
| Weight | ± 9 kg |
| Thermal conductivity aluminium | 0.025 [W/m K] |
| Thermal resistance | 1.33 [m² K/W] |
| Reflection index | >88 % |
| Emissivity | 0,12 |
| Compressive strength | 10.2 kPa (1020 kg/m²) |
| Stabilisation temp. | -20°C/+80°C |
| Composition | Plastic film + dry air bubbles + aluminium foil + dry air foam |
| Noise insulation against impact noise | 22 dB |
| Resistance to water vapour | > 10 MNs/g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Nozzle for HES 510
Stair bolt
Rechargeable battery For Würth power tools Li-ion 12 volt
Holder For small abrasives
Anchor rod WIT-C 200, yellow zinc-plated steel
Random orbital disc-type sander ETS 150-E twin
3/8-inch socket wrench insert, metric long
Bending lever
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Wheel hub grinder type A