Indexable insert cermet/tungsten carbide VBMT (finishing)
ISO P finishing VB
INDEXAINRT-VBMT160408-MP-HC3225
Register now and access more than 125,000 products
- Positive rake
Compared with carbide, cermet as a cutting material has a better wear resistance and a lower propensity for the development of built-up edges in tough materials. Its self-sharpening wear pattern keeps cutting forces low even after long cutting times. In finishing operations, this prolongs the service life and enables the greatest possible dimensional stability and glossy surfaces.
Datasheets(X)
Longitudinal turning, facing and copying rotation for moderate infeed
Material to be processed | Steel |
Supply type | Smoothing |
Material | Carbide |
ISO-Code Rotating | VBMT 160408 |
Chip breaker code | MP |
Carbide type ISO | P25 |
Carbide type | HC3225 |
Machining conditions for indexable insert | Medium |
Shape of indexable insert ISO | V |
Clearance angle of indexable insert ISO | B |
Tolerance class of indexable insert ISO | M |
Indexable insert type ISO | T |
Size of indexable insert ISO | 16 |
Thickness of indexable insert ISO | 04 |
Corner radius of indexable insert ISO | 08 |
Coating | CVD |
Carbide type area ISO | P |
Materials group | P (primary application) |
min./max. ap | 0.5-2.3 mm |
f min./max. | 0.1-0.25 mm/r |
Min./max. Vc in steel | 150-370 m/min |
Last viewed
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Combination wrench, inch with POWERDRIV®
Hexagon bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Washer DIN 1441, steel, plain, for bolt, product grade C
Cartridge Adjustable for wire stripping pliers
Corvus full-grain leather S3 safety boots
Rechargeable battery Li-ion 18 V BASIC M-CUBE
1/4" multi-socket wrench insert bi-hex, multi profile
L-shaped key TX, short version