Impacradón
ROOFINSU-IMPACRADON-1,20X15M
Art.-no. 0681001222
EAN 4068362491900
Register now and access more than 125,000 products
Features
- Sheet composition (8 mm thick): polyethylene bubble layer, metallised polyester and polyethylene foam.
- Generates no static electricity.
- Lightweight, clean, easy to apply.
- High technical versatility, compatible with other systems and materials.
- Impervious to moisture, creating an excellent condensation barrier.
Certificates
- CE marked.
- ETA (European Technical Assessment): ETA 26/0156, dated 26/02/2026.
- Radon Gas Test according to ISO/DTS 11665-13.
- Acoustic test according to UNE-EN ISO 10140-3:2022 and UNE-EN ISO 10140-1:2022.
- Compressive strength test: according to UNE-EN 826:2013.
- Core thermal resistance tested according to UNE-EN ISO 22097:2023 and UNE-EN 12664:2002.
Datasheets(X)
• For floors between dwellings.
• For floors in contact with non-living spaces, garages, porches etc.
• For floors in contact with the ground.
• Inverted roofs.
• Flat surfaces.
• Heated floors, under the insulation plate installed in underfloor heating systems. Do not allow direct contact with the heat source.
Compliant with technical code: CTE DB-HS1 (protection against moisture) and CTE DB-HS6 (protection against radon gas):
• Level the surface.
• Correct installation position: polyethylene foam layer facing upwards.
• Overlap sheets by at least 10 cm and seal with aluminium tape.
• A 50 mm slab or compression layer is recommended.
Length of roll | 15 m |
Roll diameter | 36 cm |
Thickness | 8 mm |
Number of plies | 3 PCS |
Material | PE - Polyethylene |
Colour | Black |
Min. temperature resistance | -20 °C |
Max. temperature resistance | 80 °C |
Stretch capacity | 0 % |
Transverse stretch capacity | 0 % |
Longitudinal tensile force per 50 mm | 8 cN |
Transverse tensile force per 50 mm | 7 cN |
Resistance to tear propagation (longitudinal) | 371 cN |
Resistance to tear propagation (transverse) | 0 cN |
Water-vapour permeability | 5.7 g/m²/min |
Area | 18 m² |
Building material class | F - Of high flammability |
Coating weight per m² | 200 g |
Product weight (per item) | 4000.000 g |
Number per pallet | 6 PCS |
| Dimensions (roll) | Thickness | Units/pack | Pallet |
| 1.2 x 15 m (18 m²) | 8 mm | 18 m²/roll | 8 rolls |
Last viewed
Stop angle accuracy 1
ATO resettable fuse for continuous operation (permanent installation)
Hexagonal bolt with shank for pressure container construction ISO 4014, A4 stainless steel
Quick-action chuck Metal sleeve
Hand tap, second tap HSS DIN 352
Washer ISO 7090, black-oxide 200 HV steel
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Continuously adjustable one-ear clamp
AL 12 long plate pair
Hexagon nut ISO 4032 steel 6/8, plain