Hot-melt edgebanding adhesive for industrial machines

Name: Hot-melt edgebanding adhesive for industrial machines
Brand: Würth
SKU: 0892100120

Edgebanding adhesive granules, industrial machine.
MLTADH-GRANULATE-RESIN-BEIGE-20KG

Art.-no. 0892100120

EAN 4045989470846

All versions

Similar products

Prices for customers after login

Hot-melt edgebanding adhesive for industrial machines

Art.-no. 0892100120

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

For automatic roller edging.

EVA copolymer granules

Flexible and transparent

No joint marks.

Excellent adhesion

Clean application

Leaves no threads

No edge inlays when edge cutting

Does not contaminate machine parts

High strength

NoticeRecommended speed: 10-30 m/minute (depending on the edge width)
Application temperature: 170 to 200 °C
Softening point: approximately 105 °C

This information is based on our own experience. We recommend performing a test first. Due to the wide range of applications, and storage and handling conditions, we take no responsibility for the result of a specific application. We assume no liability for the information and technical advice provided by our customer service team, except where the advice or information provided falls within the scope of the contract or where the advisor has acted deliberately in bad faith. We guarantee the consistent quality of our products and reserve the right to make technical modifications and further developments.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application areaFor edging polyester, melamine, PVC, ABS, solid wood and plywood, as well as non-pressed impregnated paper.

InstructionsClean the surface and remove any dust. Make sure the surface and edge are at room temperature, ideally 18 °C. The wood moisture content should preferably be between 8 and 10 %. Avoid drafts when working.
Check the temperature regularly and adjust if necessary. Adjust weight so the adhesive bubbles slightly at the edges.
The bonded material can be machined immediately after joining.

Weight of content	20 kg
Chemical basis	Ethyl vinyl acetate
Colour	Brown beige RAL 1011
Viscosity	75000 mPas
Viscosity conditions	at 200°C
Min./max. processing temperature	190 to 220 °C
Min./max. temperature resistance	5 to 250 °C
Shelf life from production	60 Month