Hole saw mount
AMO-Max hole saw mount
HOSAWMNT-F.AMOMAX-10
Art.-no. 0911112010
EAN 4038898385998
Register now and access more than 125,000 products
Test reports 031-02 and 05-141
1. Pre-drill external thermal insulation composite system (without impact)
2. Drill centre drill hole into the substrate
3. Produce a drill hole suitable for the substrate and anchoring element
Insert the reset pin and then install the spacer
Drive in the spacer using the impact sleeve
Remove setting mandrel
1. Set fastening element (e.g. anchor rod) in place
2. Fit spacer and plastic sleeve
Fix and install attachment (in accordance with the installation instructions for the mounting element)
Test reports 031-02 and 05-141
Datasheets(X)
Suitable for hammer drill bit | 10 mm |
Last viewed
Vernier callipers, digital
Classic trousers
Stud with threaded end ≈ 2d DIN 835, blue passivated zinc plated 8.8 steel (A2K)
Cartridge Adjustable for wire stripping pliers
Glass socket bulb
Mandatory sign
Tile cutter WAC 130
Round cutting wire
Handle
Hexagon bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)