Hexagonal bolt with shank
ISO 4014 steel 8.8 flake zinc silver
SCR-HEX-ISO4014-8.8-(ZFSHL)-M20X140
Register now and access more than 125,000 products
Zinc flake coatings are chrome (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that require vehicle construction standard corrosion protection requirements.
The corrosion resistance of ZFHSL is as follows:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient.
- Adjusted friction coefficient range from 0.09μ - 0.14μ due to top coat with integrated lubricating particles
ISO 4014 replaces DIN 931 | There is some similarity | Nominal size extended | Width across flats for M10, M12, M14 and M22 changed.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M20 |
Länge (l1) | 140 mm |
Hauteur de tête (k1) | 12.5 mm |
Entrainement extérieur (s1) | WS30 |
Normes | ISO 4014 |
Matière | Steel |
Property class | 8.8 |
Finition | Flake zinc silver |
Korrosionsschutzdauer | 720 h |
Forme de tête | Hexagon head |
Type d’entrainement | Outer hexagon |
Type de filetage | Metric thread |
Taraudage | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) (b) | 52 mm |
Product class | A |
Conforme à la norme RoHS | Yes |
Last viewed
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, zinc-plated, blue passivated (A2K).
90° push-in elbow For Stapa-Steck-WESF steel-armoured pipe
NP profile half cylinder In 6-pin system
Plus Quadro-L Vario hammer drill bit
Twist drill bit HSCo DIN 338 type RN oxide
Drilling screw, hexagon head with reduced drill tip piasta®
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Charging cable
Fabric sanding belt Zirconia alumina electric grinding file
Hexagonal bolt with thread up to the head DIN 933, A2 80 stainless steel, plain