Hexagon nut with clamping piece (all-metal) fine thread DIN 980, steel, strength class 10, zinc-nickel-plated (P3E)
DIN 980 V, steel I10I, zinc-nickel, fine thread
NUT-SLOK-DIN980-V-I10I-WS13-(P3E)-M8X1
Register now and access more than 125,000 products
Protection against loss by crushing the nut body
DIN 980 has been withdrawn and replaced by ISO 10513. There is some limited similarity (thread M18×2, M18×1.5, M20×2, M22×2, M22×1.5, M27×2, M33×2 and M39×3 removed | Nut height changed | Width across flats changed for M10, M12 and M14 to 16, 18 and 21 mm | Standard thread included in ISO 7042 | Strength class 5 removed | ISO 10513 applies to the strength classes 8, 10, 12).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter x pitch (D) | M8 x 1 |
Height (m1) | 8 mm |
External drive (s1) | WS13 |
Standards | DIN 980 |
Material | Steel |
Property class | I10I |
Surface | Zinc nickel |
RoHS-compliant | Yes |
Corrosion protection period | 600 h |
Locking device operating principle | Single part clamping nut metal |
Locking function | Locking against loosening by clamping |
Last viewed
Window frame screw AMO® III type 1
Round wire snap ring and snap ring groove DIN 9925, A2 stainless steel, for shafts
Standard cable tie with plastic latch
Blind bucket rivet, flat head
1-ear clamp with insert ring
Double-end box wrench, deep depressed centre 8 pieces
Metric combination wrench with POWERDRIV®
3/8" cardan joint insert short
Ratchet for 10 mm bits
Hand tap, second tap HSS DIN 352