Hexagon nut DIN 934, steel I10I, plain
DIN 934 bare steel I10I
NUT-HEX-DIN934-I10I-WS22-M14
Register now and access more than 125,000 products
Hexagonal nuts complying with the DIN 934 standard cannot support test loads as per DIN EN ISO 898-2.
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (Nominal diameter changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (D) | M14 |
Height (m1) | 11 mm |
External drive (s1) | WS22 |
Standards | DIN 934 |
Material | Steel |
Property class | I10I |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Needle and nozzle kit ESENCIAL W21
Soft wax
Guide head For CPS cable feed devices (apart from CPS 1)
Countersunk screw, type SK/A4 — cotter-pin installation DIN 7991 (ISO 10462) A4 stainless steel, with countersunk washer, A4 stainless steel
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Windscreen cleaner with anti-freeze protection down to -10 °C
Safety shoe S3 CI BLACK STEEL
Blind rivet, 120° countersunk head
Wire end ferrule with plastic sleeve
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled