Hexagon head serrated screw with flange W-0273, steel 100, zinc-plated, yellow chromated (A2C)
W-0273 steel 100 zinc plated yellow
SCR-RIPP-FLG-100-WS8-(A2C)-M5X16
Register now and access more than 125,000 products
Metric standard thread
Strength class 100 (approx. strength class 10.9)
Surface:
Yellow galvanised (A2C)
Corrosion resistance:
Approx. 96 hours of base metal corrosion according to DIN EN ISO 9227-NSS
Working principle of locking ribs:
During tightening, the locking ribs "roll" the counter-material in the area of the bolt contact surface. This causes a plastic deformation that hardens the surface. No significant settling is determined at the end of tightening. The locking ribs limit the amount of settling of the connection and therefore reduce the loss of pretensioning force.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 16 mm |
Flange diameter (dc) | 11.2 mm |
Head height (k1) | 6.3 mm |
External drive (s1) | WS8 |
Internal drive (s1) | 0 - not applicable |
Standards | WN 273 |
Material | Steel |
Property class | 100 |
Surface | Zinc plated yellow |
RoHS-compliant | No |
Locking device operating principle | Ribs |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Thread type | Metric thread |
Pitch | 0.8 mm |
Thread form | Standard metric thread |
Thread design | 0 - not applicable |
Design | Threaded to head |
Last viewed
Hot air blower HLG 2300-E POWER
TX bit C 6.3 (1/4 inch) with hole
Cartridge Adjustable for wire stripping pliers
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Pneusil repair set
Twist drill bit HSCO DIN 338 type RN
Nozzle and needle kit ADVANCE W18
VDE heavy-duty side cutters DIN ISO 5749, IEC 60900
Flat blade fuse MINI Silver
Hand-held rivet pliers With long nozzle