Heavy-duty roof hook Gravity die-cast aluminium
Heavy duty roof hook
ROOFHOK-ALUD-HDUT-PL180X70MM-HO9MM
ZEBRA
Register now and access more than 125,000 products
Height compensation of up to 30 mm
Roof unevenness can be easily compensated by the mounting rail.
Ribbing on bracket
Optimum positive and friction locking
Fully pre-assembled
Mounting rail, 39 x 37, 47 x 37 and 60 x 37, can be attached to the roof hook without preparatory work.
Maximum load values
- Pressure parallel to roof surface: 2.35 kN
- Pressure perpendicular to roof surface: 2.05 kN
- Tensile force perpendicular to roof surface: -2.05 kN
We recommend using two ASSY 3.0 wood screws, countersunk 8 x 100 mm, A2 stainless steel, to attach each roof hook to the rafters. Please observe edge and axial clearances in accordance with general technical approval.
General technical approval Z-14.4-515
Datasheets(X)
Base hole diameter | 9 mm |
Material | Aluminium |
Product weight (per item) | 490.500 g |
Last viewed
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
H70 diamond socket cutter
pias® drilling screw, raised countersunk head with AW drive
Hammer drill bit Plus Duo-S Vario
1/4-inch socket wrench insert, TX head For external TX screws
1/2 inch socket wrench insert, metric
Damper For number plate holders
Bonding bridge adhesive UNIEPOX
Expander tool for drop-in anchors, without visual installation control
Carpet knife With fixed blade and quick-change fastener