Heavy-duty castor with rotating holder
Heavy-duty swivel castor
HDUTSWIVCSTR-SCRONPLT-D150-700KG
Register now and access more than 125,000 products
- Ball bearing hub
- Strength: 95±3 Shore A
- High load-bearing capacity
- Temperature resistance from -20°C to +80°C
- Excellent sliding properties and elasticity
- Good resistance to wear and tear
- Heavy-duty, electrolytically galvanised sheet steel housing
- Double ball collar with grease lubrication
- Dust protection ring
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for environments exposed to the weather, alcohols and glycols. Not recommended for use in environments with organic and mineral acids and base alkalis.
This castor is used wherever there is a need for enormous load-bearing capacity: Heavy-duty lifting systems, elevating platforms, steering and transport chassis, mobile platforms etc.
 | |
Roll diameter (D) | 150 mm |
Roll width (L) | 50 mm |
Load capacity | 700 kg |
Height (H) | 200 mm |
Length (A) | 140 mm |
Width (B) | 110 mm |
Hole distance (a) | 105 mm |
Hole distance 2 (b) | 80 mm |
Elongated hole diameter (c) | 11 mm |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 80 °C |
Bolt hole depth (R) | 70 mm |
Last viewed
Phillips bit
Pair of escutcheons Rounded
Dry abrasive paper strip wood KP perfect
Hydraulic crimping tool, WHK 60/22 For half-shell crimping inserts, width 22 mm
1/2 inch socket wrench insert TX with hole
Standard cable tie with plastic latch
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
System case 8.4.2
Adapter
Plastic multi-purpose Zebra Shark® anchor without collar