Heat-shrink repair sleeve
Heat shrink repair sleeve
REPSLEV-HSHR-L500MM-55/13MM
Register now and access more than 125,000 products
- Inside coated with hot-melt adhesive
- Good physical, chemical and thermal properties
Meets the requirements of VDE 0298 Part 1 for cable sheath tests
Datasheets(X)
Fast, permanent and water-tight repair of damaged cable sheaths. The sealing rail can be removed after the sleeve has cooled down.
 | |
Type | 53/13 |
Diameter (D) | 55 mm |
Diameter (shrunk) | 13 mm |
Length | 500 mm |
Sleeve-wall thickness when shrunk | 3.4 mm |
Dielectric strength | 12 kV/mm |
Min./max. temperature conditions | -40 to 65 °C |
Min. shrinkage temperature | 90 °C |
Change in length (after shrinking, in %) | +10% |
Ultraviolet resistance | Yes |
Material | Polyolefin |
Halogen-free | Yes |
Colour | Black |
Last viewed
Charging cable for CLL 18, CLLG 18 and PLL 18
Twist drill bit HSCo DIN 338 type RN oxide
Daily Race S1P low-cut safety shoes
Hammer drill bit Max Quadro-L Vario
Snipe nose pliers DIN ISO 5745
Ratchet magazine screwdriver not equipped
Sealant smoothing agent
TX screwdriver with round shank
Combination adapter A4/A2 for cylinder saw
Laser distance meter WDM 2-18