Heat-shrink repair sleeve
Heat shrink repair sleeve
REPSLEV-HSHR-L250MM-36/10MM
Register now and access more than 125,000 products
- Inside coated with hot-melt adhesive
- Good physical, chemical and thermal properties
Meets the requirements of VDE 0298 Part 1 for cable sheath tests
Datasheets(X)
Fast, permanent and water-tight repair of damaged cable sheaths. The sealing rail can be removed after the sleeve has cooled down.
 | |
Type | 34/8 |
Diameter (D) | 36 mm |
Diameter (shrunk) | 10 mm |
Length | 250 mm |
Sleeve-wall thickness when shrunk | 3.2 mm |
Dielectric strength | 12 kV/mm |
Min./max. temperature conditions | -40 to 65 °C |
Min. shrinkage temperature | 90 °C |
Change in length (after shrinking, in %) | -10% |
Ultraviolet resistance | Yes |
Material | Polyolefin |
Halogen-free | Yes |
Colour | Black |
Last viewed
Precision screwdriver, flat slotted
1/2 inch socket wrench insert metric, hexagon, short
Spot separating chisel For pneumatic chipping hammers
Gypsum plasterboard anchor W-GS type K with reinforced centring point
Holder For small abrasives
Bond + Seal structural adhesive
3/8" clamping strip With 16 clamps for 3/8 inch sockets
Cutting knife, curved
Hand tap, second tap HSS DIN 352
AT 48 RD automatic door seal