Hardener for white D3/D4 adhesive
Hardener for white adhesive from D3 to D4
HARD-WOCLDGLU-D3/D4-250G
Register now and access more than 125,000 products
Better bonding
The hardener acts on the adhesive, improving its anti-moisture characteristics.
Changes the approval of the adhesive
By applying the hardener mixed with D3 white adhesive, an adhesive of D4 quality is obtained, pursuant to standard UNE EN 204-93.
The hardener is sensitive to moisture. It is therefore recommended that when the entire container is not used, the container be hermetically closed, as ambient moisture may render the product unusable. Keep away from foodstuffs. Wash your hands when you finish the work. Use an industrial cleaning agent. Never use solvent.
Datasheets(X)
For outdoor bondings that are subject to continuous atmospheric changes (sun, rain, cold/heat etc.).
Chemical basis | Isocyanate |
Density | 1.16 g/cm³ |
Viscosity | 3000 mPas |
Viscosity conditions | at 23°C |
Colour | Transparent |
Min. flashing point | 200 °C |
Shelf life from production | 8 Month |
Last viewed
Core drill range HSS, 7 pieces
Disposable breathing mask FFP1 CM 2000 with valve
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Thread die HSS DIN EN 22568 for standard metric ISO threads
Metric combination wrench with POWERDRIV®
Metal coils 4 mm With Powerglider
Plus Quadro-L Vario hammer drill bit
Metric combination wrench with POWERDRIV®
Plastic holder For double open-end wrench assortment
Cylinder saw adapter A2 With ejection function