Hammer drill bit Plus Quadro-S

Name: Hammer drill bit Plus Quadro-S
Brand: Würth
SKU: 0648702445

Hammer drill bit Plus Quadro-S
DRL-MN-PLUS-QUADRO-S-4SPRL-24/450/400

Art.-no. 0648702445

EAN 4045727118917

All versions

Specification

Strong hammer drill bit with X-shaped head geometry and four-spiral feed helix for fast drilling speed with significantly smoother running and greater precision in comparison with conventional drill bits featuring a head with two cutting edges

No hooking in

The drill bit tends to hook into reinforcements to a far lesser extent thanks to the geometry with four cutting edges.

Precise spot drilling

The special self-centring point enables precise spot drilling.

Greater precision

This is the result of the four cutting edges of the drill bit head being better positioned in the drill hole, as well as the four-spiral drill bit helix and the smaller friction surface. The four large-volume feed helixes ensure fast transport of drilling dust.

Notice

Please note: With long drill bit lengths, pre-drill with a short drill bit of the same diameter!

Iron reinforcements may only be drilled through with permission from a structural engineer.

Technical information


Drilling speed (point system)	3 of 4 points
Smoothness of running (points system)	3 of 4 points
Accuracy (point system)	2 of 4 points
Reinforcement strength (points system)	2 of 4 points
Service life (points system)	2 of 4 points
Diameter (Ø)	24 mm
Length	450 mm
Working length	400 mm
Number of cutting edges	4 PCS
Number of spirals	4 PCS
Tool holding device	Suitable for SDS-plus

Documents

Product information

Datasheets (0)

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Adapter For plug-in tools Plus to Max

ADAPT-HAMDRL-PLUS/MAX

Art.-no. 071444 04

For drill bits with SDS-plus mounting shank on machines with SDS-max drive arbour

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).