HSS cylinder saw with chip breaker
Cylinder saw, HSS, chip breaker
SAW-CYL-HSS-CHIPBREAKER-D44MM
Register now and access more than 125,000 products
- The shape of the cylinder saw teeth allow chips to be broken during drilling, meaning that chips are better removed.
- Rapid chip removal results in shorter work times compared to traditional saws.
- Can be used with hand-held or fixed drilling machines
- From Ø 8 to Ø 16 with fixed adapter and cylindrical fitting
- From Ø 17 to Ø 100 with removable adapter and cylindrical fitting with 3 slotting sections
- Adapter equipped with centre drill
For drilling aluminium, steel, cast iron, tin, copper and stainless steel plates up to 7 mm thick.
 | |
Diameter (Ø) | 44 mm |
Cutting depth | 7 mm |
Recommended rotation speed in soft steel | 195 rpm |
Recommended rotation speed in tool steel and stainless steel | 95 rpm |
Recommended rotation speed in cast iron | 130 rpm |
Recommended rotation speed in brass | 260 rpm |
Recommended rotation speed in aluminium | 290 rpm |
Datasheets(X)
Last viewed
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
Terminal block with wire guard
Plus Quadro-L Vario hammer drill bit
MacPherson spring strut compressor For MacPherson spring struts
Combination filter ABEK1HgP3 RD For breathing protection series 175
Bar handle, stainless steel finish For kitchen dimensions
Metric O-ring
Jet pipe HDR 160 C/185 PP For high-pressure cleaner HDR 160 Compact and HDR 185 Power Plus
Contact glue MASTIK 800
Fabric sanding belt Synthetic corundum for electric grinding file
