HSS circular saw blade

For treating low- or medium-strength iron and steel in slow machines (around 50 rpm) - Tooth pitch (t):

• 4 mm — for profiles and tubes with a wall thickness of 0.8–1.5 mm.


• 6 mm — for medium profiles, pipes and solid materials with a wall thickness or diameter of 1.5–20 mm.


• 8 mm — for resistant profiles and solid materials with a wall thickness or diameter of 15–around 50 mm.


• For cooling or lubrication, use Würth coolant at a mixture of 5:1.

For treating stainless steel and other high-strength materials (from 800 N/mm² traction) on slow machines (around 10–20 rpm) — tooth pitch (t):

• 4 mm — for profiles and tubes with a wall thickness of 1.5-4 mm.


• 6 mm — for profiles, tubes and solid materials with a wall thickness or diameter of 4–around 50 mm.


• 8 mm — for extra-strong diameters and solid materials above 50 mm.


• For cooling or lubrication, use Würth coolant at a mixture of 7:1 for stainless steel and 8:1 for high-strength materials.