HK sheet metal rail

Name: HK sheet metal rail
Brand: Würth
SKU: 0865726180

Sheet-metal rail HK
SHTMETRL-SOL-ALU-TRAPEZE-180MM
ZEBRA

Art.-no. 0865726180

EAN 4050641890597

All versions

Similar products

Prices for customers after login

HK sheet metal rail

Art.-no. 0865726180

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

For mounting directly on the trapezoidal plate

Rail length 180 mm, pre-drilled

The sheet metal rail HK can be attached directly to the crest without requiring additional drilling.

With bonded EPDM sealing strips

Additional attachment of EPDM sealing tape is entirely unnecessary

Notice

It should be ensured in advance that the sheet metal is sufficiently attached to the substructure. The maximum load-bearing capacity of the sheet metal should also be checked. Approval must be obtained from the manufacturer, particularly in the case of sandwich roofing elements. We recommend using ZEBRA 4.5 x 25 thin sheet metal screws with sealing washer for attachment. The module clamping areas must be checked and aligned with the bead spacing before attachment. The module manufacturer's information must be observed.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

The rail is screwed onto the raised bead parallel to the beading.

Length	180 mm
Height	12 mm
Width	30 mm
Number of D 8.5 mm holes	2 PCS
Number of D 5 mm holes	2 PCS
Number of D 6.5 mm holes	2 PCS
Material	Aluminium

Required accessory:

Product

Description

Quantity

Price
/PU

Thin sheet metal screw With hexagon head and sealing washer DBS

SCR-DBS-WSH16-BIMET/A2-WS8-(RUS)-6,0X25

ZEBRA

Art.-no. 020106025

A2 stainless steel and steel tip and sealing washer for the Splinter-free connection of butt plate screw joints for steel and aluminum profiles

x 300 pcs

Thin sheet metal screw With hexagon head and sealing washer DBS

SCR-DBS-WSH14-BIMET/A2-WS8-(RUS)-4,5X25

ZEBRA

Art.-no. 020154525

A2 stainless steel and steel tip and sealing washer for the Splinter-free connection of butt plate screw joints for steel and aluminum profiles

x 300 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).