HIDROPLAST
Water-repellent additive for concrete and mortar
MORTADD-WATERPROOFINGPOWDER-WHITE-25KG
Register now and access more than 125,000 products
- Improves workability
- Reduces the risk of exudation and separation
- Improves bonding and protection on iron reinforcement
- Improves mechanical properties and durability
- Reduces the quantity of water in the mixer, maintaining fluidity
This information is a recommendation only, based on our experience. However, we cannot accept responsibility for individual results with this product, due to its numerous potential applications, and storage and application conditions that are beyond our control. We always recommend that you test the product first. We guarantee the quality of our products. We reserve the right to make technical alterations and developments.
Datasheets(X)
- The decreased water in the mixer reduces the porosity of the concrete/mortar once fully cured, reducing the penetration capacity of water
- Reduces water absorption by capillary action
Add between 0.5% and 1.5% of the weight of the mortar/concrete cement. An increase in dosage is possible if adequate prior tests are performed, though this reduction may impact the setting time. Add the plasticiser to the water in the mixer only after the cement and aggregates have been added.
Contents | 25 l |
Colour | White |
Chemical basis | Water-carbon emulsion |
Product weight (per item) | 25.000 kg |
Last viewed
Carbide reversible blade For RALI® plane
Suction hose For AMTS
Twisted rod For rivet nut setting pliers HES 510
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Small abrasives mini compact fleece disc
ALG 18 V M-CUBE charger
1/4-inch and metric ratcheting double box-end wrench For hexagon drive
Interior trim clip, closed
Multi-purpose drill bit MFD-S Plus
Collated nails and gas cartridge NG CS-2/3 HFB