Grommet Brass, MS 63 F 30, nickel-plated
Rosette brass nickel-plated, shape 1
ROS-BRS-(E2J)-3,0X9,8X2,1
Register now and access more than 125,000 products
Grommets are used as a spacer for various countersunk screws. They are used as washers and alignment aids, as well as to equalise the pressure on the parts that need to be secured, particularly if soft materials such as wood, plastic, leather, etc. are used.
Datasheets(X)
CAD data (available after login)
 | |
Internal diameter (d1) | 3.0 mm |
Outer diameter (d2) | 9.8 mm |
Height (h1) | 2.1 mm |
Material | Brass |
Surface | Nickel plated |
Last viewed
3/4-inch impact socket wrench insert hexagon, metric, short
Knotted-link chain According to DIN 5686 without quality requirements
Spiral clamping pin, standard design ISO 8750 steel plain
T-connector For commercial vehicles
Leather sweat band For Baumeister hard hats
Single guide rail for Redoslide
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Climbing section extension For assembly platform
Adhesion resin UNIRESIN
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A2-070 stainless steel, plain