Glass microparticle sand
Glass powder sand
GLSPWDSND-0,25MY-20KG
Register now and access more than 125,000 products
Features
- Micro glass particles with angular shapes for stripping ferrous or non-ferrous metals by sandblasting.
- For restoring, cleaning and stripping.
- High roughing capacity.
- Plastic foil packaging inside to prevent sand from becoming wet, or package breaking or spilling when handling.
Advantages
- Faster than the traditional method.
- Iron-free, allowing application on all common surfaces.
- Less harmful to health because it is free from free silica and does not cause risks of silicosis.
- Consistent and uniform finish.
- Stronger packaging than the market standard. Easy to open.
Benefit
- Reduces consumption of abrasives.
- Working times are reduced thanks to its high abrasion rate.
Details of packaging protection: Cardboard, plastic and paper.
PPE required
Features
MASK: Disposable, protects against particles.
FFP1 NR
NE-EN 149:2001+A1
FACE GUARD: Polyethylene and clear polycarbonate eyepiece visor.
UNE-EN 166 1B 3
EARPLUGS: Vinyl foam.
UNE-EN 352-2
GLOVES: Highly resistant to abrasion. Extra long 400 mm.
UNE-EN420
UNE-EN388
Form | Round |
Colour | Black, similar to RAL 9004 |
Weight of content | 20 kg |
Grid size | 0,25 µm |
Density | 4 g/cm³ |
| Technical data | |
| SiO2 | 72.50 % |
| NaO | 13.70 % |
| CaO | 9.80 % |
| MgO | 3.30 % |
| Al2O3 | 0.40 % |
| Fe2 O3 | 0.20 % |
| K2 O | 0.10 % |
| Hardness: | 6/7 Mohs (HV 100:530) |
| Specific weight | 2.60 g/cm3 |
Datasheets(X)
Last viewed
Felt segmented polishing disc For angle grinders with M14 direct mount
Pan Head screw with hexalobular head ISO 14583, steel 8.8, zinc-plated, blue passivated (A2K)
Nozzle and needle kit ADVANCE W18
Hot air blower HLG 2300-E POWER
Fabric sanding belt Synthetic corundum for electric grinding file
Screw fitting
1/2-inch jointed-head ratchet, extendable
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
TX double box-end wrench
Dispenser system
