Gel connection/joint sleeve WGM 0.6/1 kV
Gel connection/joint sleeve set, model WGM
JNTSLEV-GEL-WGM6
Register now and access more than 125,000 products
Advantages of gel technology:
- No special tools (crimping pliers, soldering torch etc.) required
Saves on costs
- No curing, ready to use immediately
Saves time
- No open flame required
- No expiration date
Can therefore be stored for an unlimited period
- No mixing required
The 5-pin screw terminal block included in the scope of delivery must be used.
WGM16 to be used only in conjunction with rigid conductors!
DIN EN 50393
Datasheets(X)
Can be used underground and for above-ground applications
Typ | WGM6 |
Cable type for connection sleeve | 3 - 5 x 1.5 - 6 mm² |
Main cable type for branch sleeve | 3 - 5 x 2.5 mm² |
Stub cable type for branch sleeve | 3-5 x 1.5 mm² |
Length x width x height | 155 x 59 x 31 mm |
Temperaturbeständigkeit min./max. | -40 to 70 °C |
Résistance aux UV | Yes |
Sans halogène | Yes |
Temperaturbeständigkeit min. | -40 °C |
Temperaturbeständigkeit max. | 70 °C |
Last viewed
Serrated grinding sleeve mount For serrated grinding sleeves
Twist drill bit HSCo DIN 338 type RN oxide
3/8-inch socket wrench insert, metric long
Blade receptacle Uninsulated
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Agitating basket For viscous, adhesive materials
Particle filter P3 R For breathing protection series 175
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Multi-pocket summer vest
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated