Gasket for plumbing, heating and gas
NBR sealing ring
RG-SEAL-NBR-1/2-D13-D18-2,2MM
Register now and access more than 125,000 products
- Working temperature: -20ºC to +80ºC.
- Breaking load: 11 MPa.
This data has been obtained in laboratory tests, in temperature- and humidity-controlled environments. This data may vary depending on the working conditions and the products they are in contact with. Testing is recommended before final installation.
Datasheets(X)
Suitable for water, gas, oils and grease in general.
Last viewed
System case 4.4.2
Twisted rod For rivet nut setting pliers HES 510
Wood biscuit joiner HVF 800
Full Absorption cloth
Start Sleeve for cable feed devices
Cutting disc, carbide-tipped
Tool holder with ratchet Short design
Chemical anchoring WIT-EA 150
Hand tap, taper tap HSS DIN 352
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1