Furniture hinge Series 1
Hinge, concealed, series 1
PRESSON-HNGE-6-94-SCREWON-(NI)-A-L
Register now and access more than 125,000 products
- Zinc alloy cup and arm
- Lateral adjustment integrated into the hinge arm
- Depth and height adjustment made at the base
- Fixed gap of 0.7 mm between the door and the side panel (even after lateral adjustment)
- The soft hinge is equipped with a new slow-close mechanism, with a selector to adjust the closing force
Minimum cup hole depth: standard/push hinge 11 mm; soft hinge 13.5 mm
Datasheets(X)
Hole drilling | 52/5.5 mm |
Hinge pot depth | 11 mm |
Suitable for min. door thickness | 14 mm |
Suitable for max. door thickness | 20 mm |
Height adjustment | +/- 2 mm |
Depth adjustment | + 2.8 mm/- 0.5 mm |
Lateral adjustment | + 4.5 mm/- 1.5 mm |
Minimum gap | 0.7 mm |
Suitable for drill hole diameter, pot hole | 35 mm |
Opening angle | 94 Degree |
Minimum joint | 0.7 mm |
Material | Die-cast zinc |
Surface | Nickel plated |
Automatic | Yes |
Door position | Inset |
Damper | No |
Type of assembly | Screw-on |
Spring | Yes |
Product weight (per item) | 71.500 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!